RR-800-2 (10x42mm)
Scope description Rectile description

The RR-800-2 was designed specifically for long range military and sports shooters especially for those shooting .308 Winchester (7.62 NATO), .223 Remington (5.56 NATO) rounds, and requiring a 10x fixed magnification. This widely acclaimed scope features the patented PFI ballistic reticle with windage marks out to 10 mph, The system is extremely accurate, quick to use and easy to understand. After ranging the target and estimating windage, shooters from novice to expert, can easily shoot out to 800 yards without any manual adjustments. The RR-800 series has been thoroughly combat tested and has surpassed the rugged requirements demanded by the military. From military to law enforcement to sport shooters alike, the RR-800 can be counted on.

MSRP: $849.99 US  

  • • 10x42mm featuring side-wheel focus and threaded eye-piece adjustment with lock-ring
  • • Nitrogen filled one piece 30mm diameter 6061 T6 aluminum tube with matte black anodized finish
  • • Shock, fog, and water proof multi-coated lenses
  • • First focal plane reticle to allow for accurate shooting throughout power range without manual adjustment
  • • Positive ¼ MOA windage and elevation clicks on the low profile target type knobs with reset to zero feature
  • • Weight (oz.): 16
  • • Length (inch): 12 5/8
  • • Eye Relief (mm): 99.60
  • • Eye Relief (inch): 3.90
  • • Field of View (feet@100 yds): 11.30
  • • Exit Pupil (mm): 4.20
  • • Temperature Operating Range: 70C to -17C

COMPATIBLE BALLISTIC COEFFICIENT EXAMPLES.

  • .308 Winchester Sierra 175 gr. match king B.C. .505 @ 2600 fps
  • .308 Winchester Sierra 168 gr. match king B.C. .462 @ 2700
  • 7.62 NATO 147 gr. FMJ BT B.C. .401 @ 2800 fps
  • 6.5x55 Swedish Sierra 6.5 140 gr. SBT B.C. .495 @ 2600 fps
  • 7-08 RemingtonSierra .284 168 gr. Match King B.C. .488 @ 2600 fps
  • .223 Remington Hornaday .224, 75-gr. A‐MAX B.C. .440 @ 2700 fps
  • .556 NATO, 55/62/77 gr. (out to 600 yards)
 

NOTE: The list of ammunition and ballistic coefficients above are examples for use with our calibrated reticles. Other ammunition can be used that produce similar ballistic coefficients.

    The Rapid Reticle™ line includes the RR-800-2, which is a 10x42mm fixed power scope specifically designed for use with the .308 cartridge. The Rapid Reticle Aiming System is designed to ease the shooter’s ability to get accurate fire on target at different ranges. With clear range crosshairs from 800 yards at the bottom to 100 yards at the top, the reticle looks like a Christmas tree. With crosshairs, lines and dots, the Rapid Reticle is designed to be used without the shooter removing turret covers and making corrections by moving the elevation turret up or down.
     
    Attached to the M21A5 is a Rapid Reticle 800-2 10×42 scope manufactured by Pride Fowler Industries. The reticle consists of several hold-over lines ranging from 800 on the bottom to 100 near the top of the reticle, referred to as the Rapid Reticle Aiming System. Once the scope is zeroed, the shooter merely has to adjust the focus to the appropriate yard indicator for the desired range and wind estimation. The scope is equipped with the traditionally windage, elevation and parallax focusing knobs for fine-tuning. The scope is waterproof as well as shock proof. The scope is calibrated for the most used 168-grain or 175-grain match rounds.
     
    The RR800-2 is a matte black finished scope that uses an aluminum one-piece main tube, and weighs in at about eighteen ounces. The length measures about thirteen and three-quarters inches long, not counting the detachable sunshade. With the shade attached, the overall length measures sixteen inches. The RR800-2 has low-profile target turrets that are covered with threaded caps. The target knobs underneath are very clearly marked, and easy to see. The scope has a side focus knob, which I greatly prefer to the adjustable objective bell type of focus. It too, is covered with a threaded cap. The scope appears to be of very high quality with clear optics, and is built in Japan to PFI specs.
     
    We have removed the old scopes from both 20 inch and 24 inch AR-10T's and replaced them with a quick range acquiring scopes. The new scopes are Pride Fowler Rapid Reticle Special Ops Scope 30mm Tube 10x 42mm Side Focus 800 Yard Rapid Reticle Matte RAPID RETICLE 10 X SCOPE CALIBRATED FOR the 7.62 We talked to Pride Fowler innovators of the RAPID RETICLE scopes calibrated for the 7.62 NATO cartridge and gun. The scopes I received had a nice matte finish . The scope has a factory engineered bullet drop reticle calibrated to match the 7.62 NATO round. The reticle has bullet drop stadias at 100, 200, 300, 400, 500, 600, 700 and 800 yards. The scope reticle also includes wind pins on each stadia for 5 and 10 MPH cross winds. yards. I myself have never seen a scope this versatile. Under the turret caps resides two huge target style windage and elevation turrets big enough to sight in with a gloved hand. Removing the side turret cap exposes the parallax adjustment knob.
     
    I went to the range last thursday to sight in my fixed 10 power Pride Fowler scope. They're out of Tucson. I zero'd the scope using 55gr American eagle, more or less to get it close so I didn't have to waste my handloaded 77gr bullets that i use for hunting and long range precision shooting. I noticed right away that they use good glass, as good or better than leupold. Looking at the edges of the scope, i tried to find any unclear, jagged spots, but to no avail. Everything was looking good. My attention turned to the BDC reticle they use. Its called the rapid reticle and the only thing I need to get used to is the 100yd has mark is above the actual crosshairs. That will take some time, but it will be easy to get used to. I shot at 100, 200, 300 and 500yds. Believe it or not my best group came at 500yds. I had just under a MOA 4.75 inches. Not bad for a fixed 10 power and still getting used to the scope. I need to dial my load down a hair, I'm running at 2725fps and if I were at 2650, I'd be right where the BDC lines are.
     
    The trademark Rapid Reticle 800 LR 10x42mm scope sent me has a “side wheel parallax focus knob, first focal plane reticle, is made of 6061 T-6 aluminum, and has a heavy duty turret spring. The main body is 30mm. The reticle is also available in a 3-9x42mm with internal parallax correction in either the first or second focal plane reticle position.” Several additional scopes as well as CQB sights have been added to their list of products. You might recall both Mickey Fowler and John Pride are world-class pistol shooters who won national recognition for their prowess for many years. Since both are also avid hunters, they came up with a line of scopes to meet their rigid demands.
     
 
Items You May Also Be Interested In...
image description
RR-CQLR-1 (1-4x24mm) with Rapid Ranging
image description
RR-900-1 (2.5-10x40mm) with Rapid Ranging (Yards)
image description
SOPS-Compact Red Dot Reflex Sight